Contractors and dealers
Plan the build
before you order.
Answer a few questions about the job and get the whole ROMEX® assembly back: base, bedding, bonding and jointing, with the quantities, the install temperatures, the cure schedule and the warranty route. Every figure comes off the current data sheets.
How to use it
What it settles,
and what it does not
- It settles the product selection. Minimum joint widths, install temperature windows and traffic load ratings are transcribed from the current ROMEX data sheets, so the planner will not put a product on a job its own sheet rules out.
- It settles the pairings. ROMEX DRAIN, D1, D2000 and W1000 all need ROMEX Filler Sand, and ROMEX FUGENSAND is used with ROMEX D7000. Those come back with the product rather than after the delivery.
- It gives you bedding quantities you can order from. ROMEX TRASS BED and ROMEX ADHESION ELUTRIANT both publish coverage per bag, and the planner applies the depth your loading calls for.
- It does not count your jointing pails. Jointing consumption depends on paver format as much as on the joint, so the planner hands that to the jointing calculator, which asks for your unit size.
- It does not replace the data sheet. Where a sheet prints no figure, the planner says so rather than filling the gap. The sheet governs.
- It does not register the warranty. It tells you which guarantee the build qualifies for and that registration has to start before site work, which is the step most often found out about too late.
Call before you order
The planner gets you to a build you can price. A five minute call gets you to one we will stand behind, with the registration started and the assembly confirmed against the site.
