Skip to content

FLEX-JOINT

The world’s only permeable, flexible jointing mortar

For Light to Medium Traffic Loads

The Viscous Elastic Paving Jointing Mortar

ROMPOX® Flex-Joint is viscous elastic jointing mortar made of select sands and rubber and is suitable for vehicular rated and unbonded surfaces. ROMPOX® Flex-Joint Water is water permeable, self compacting and water emulsifiable during installation. Suitable for medium to heavy traffic up to 25 T.

Rompox Flex Joint
Vehicle loading up to 25 T
Ideal for unbonded construction
For Joint Widths from 8 mm (3/8")
Self compacting
Pressure washer safe
Highly water permeable
Used in combination with ISATec® displacement protection system
Rompox Flex Joint

FEATURES

WATCH THE ROMPOX® – FLEX-JOINT INSTALL VIDEO

HOW-TO-APPLY ROMPOX® – FLEX-JOINT

Rompox Flex Joint

1. Mixing

Open the bucket, open bottles within and pour the contents slowly and completely into the filler material component. Rinse both bottles with 100ml of water, close, shake well and add to mix.

Rompox Flex Joint

2. Add Water

Add 2.5L of water and begin mixing process. Total mixing time: at least 6 minutes. Use professional agitator or rotary-drum mixer / compulsory mixer.

Rompox Flex Joint

3. Pre-Wet

Intensely pre-wet surface. Porous surfaces as well as higher surface temperatures, require more intense pre-wetting.

Rompox Flex Joint

4. Application

Apply the mixed pavement jointing mortar onto the pre-wetted surface by pouring out in three or four spots to optimise flow capacity. Work carefully into the joints using a squeegee/rubber slider, ensuring it passes deep into the joints and fills them completely.

Rompox Flex Joint

5. Sweep Off

After approx. 10 minutes the excess mortar on the surface of the stones can be swept off carefully with a large, coarse broom. The correct moment for sweeping, is when white smears no longer form on the stone surface during sweeping.

Rompox Flex Joint

6. Final Cleaning

Finally, use a soft hair broom to do a final cleaning until all residual mortar has been removed from the surface. Sweeping should be done diagonally to the joint. Do not re-use swept off material.

 

LEARN MORE

QUESTIONS

Need some clarification? Contact our experienced and friendly team to learn more about our products and services.

ROMEX® NORTH AMERICA

SUBSCRIBE TO
OUR NEWSLETTER

Follow us on Social Media!

Skip to content