d7000 Archives | ROMEX Hardscapes

Applying Top Coats for Bonded Aggregate Surfaces When it comes to keeping your hardscape surfaces looking and performing their best, regular maintenance is key. One crucial step in maintaining bonded aggregates is applying a top coat. Over time, weather exposure, foot traffic, and site conditions can wear down your surface. By reapplying a top coat at the appropriate intervals, you can ensure long-term stability and performance. CONTACT US Why Apply a Top Coat? A top coat helps reinforce the binding properties of ROMEX products, extending their lifespan and maintaining their permeability. This additional layer of protection is especially important for high-traffic areas and commercial sites, which experience more wear and tear than residential applications. By applying a top coat as needed, you can prevent erosion, reduce maintenance costs, and keep your surfaces looking pristine. Recommended Top Coat Application Intervals The frequency of top coat applications depends on environmental conditions, traffic levels, and the specific ROMEX product in use. Here’s a general guideline for when to reapply a top coat: PROFI-DEKO – Every 3 to 10 years D7000 Rock Dust Stabilizer – Every 3 to 10 years Commercial applications will typically require a top coat sooner, while residential and lower-traffic areas may last toward the higher end of these estimates. Factors Affecting Top Coat Longevity Several factors determine how often you should apply a top coat: Climate: Areas with heavy rainfall, freeze-thaw cycles, high UV exposure, or extreme temperatures may require more frequent applications. Traffic Levels: High-traffic commercial spaces wear down faster than low-traffic residential patios or walkways. Turning vehicles can significantly accelerate wear, particularly in commercial or high-use areas. Surface Preparation: A properly installed base and bonded aggregate layer will hold up longer between maintenance cycles. If the initial installation is done correctly, it minimizes future maintenance needs. How to Apply a Top Coat Applying a top coat is a simple yet effective way to extend the life of your ROMEX hardscape materials. The process involves: Cleaning the Surface: Remove any debris, dust, or organic material to ensure proper adhesion. Dry Conditions: Ensure the surface is dry before application. Applying the Top Coat: Evenly distribute the ROMEX-approved top coat solution according to product instructions. Use a paintbrush or roller for even coverage, ensuring adjacent surfaces are protected from overspray or spills. Curing Time: Allow the surface to fully cure before exposing it to heavy traffic. Top coat application is required at the initial installation stage to ensure maximum durability. Protect Your Investment Routine maintenance, including applying a top coat, is essential for keeping your hardscapes in top condition. By following these guidelines, you can ensure that your ROMEX bonded aggregate materials remain durable, stable, and aesthetically pleasing for years to come. Need help choosing the right ROMEX product or maintenance solution? Contact our team today! CONTACT US

d7000

Applying Top Coats for Bonded Aggregate Surfaces

QUESTIONS

QUESTIONS

QUESTIONS?

SUBSCRIBE TO
OUR NEWSLETTER

Choose your region:

Subscribe for Updates

Choose your region:

Choose your region:

Choose your region:

Choose your region:

Choose your region:

Choose your region:

Choose your region:

d7000

Applying Top Coats for Bonded Aggregate Surfaces

QUESTIONS

QUESTIONS

QUESTIONS?

SUBSCRIBE TOOUR NEWSLETTER

Puncture Resistant

ADA Compliant

No Paver Shifting

Frost Resistant

Vehicle Rated

Highly Permeable

10-Year Warranty

One Time Install

Weed Resistant

Easy to Use

Pressure Washer Safe

Ant Resistant

Choose your region:

Subscribe for Updates

Choose your region:

Choose your region:

Choose your region:

Choose your region:

Choose your region:

Choose your region:

Choose your region:

SUBSCRIBE TO
OUR NEWSLETTER